Comcast Remote Codes for TV

167 Comments

1. I have a Westinghouse vr-3250df. I cannot get any Comcast remote codes to work. I also tried Sony and Samsung codes and of course the 991 method.

   • Hey Andrew. Unfortunately I have heard on a couple occasions that the Westinghouse TVs can be hard to program with any universal remote.
     I have heard that some of them need a firmware update in order to work. I’d be happy to help you search for a solution. In the meantime you might want to call Westinghouse support
     and see if they can give you any information…probably not 🙂 If you do find a code that works, please post it here. I try to keep the lists updated as much as possible and it would be a big
     help for other Westinghouse owners.

     • Hi.
       I have a phillips magnavox tv/vcr and I cannot get any of thr phillips or magnavox codes to work. Any ideas?

     • Hey EasyRider,
       Have you tried auto-programming it using the 991 method?
       Send me the model number of your TV and I’ll see what I can find.

   • I have a Westinghouse 55″ LCD TV, older-not sure of model number- but I found the code 11828 by the 991 method if this helps anyone. I haven’t seen that code listed anywhere yet. (on xfinity XR5 v4-R remote)

   • I have a 19 led proscan tv with the black Comcast remote I need to find to code that works???

     • Thanks it was very heplful

2. thank u thank u ive been trying to set the remote for a bit i needed
   the codes got it on the 1st try!!!

   • You’re welcome!!

3. Comcast gave me code: 11178 for Westinghouse HD TV

   • Thanks Anne! I’ll be sure to update the list for everyone.

4. Thank you so much. Ive been trying to find a code for it, and when I would look on Comcasts site, they would only give a four digit number.

   • You’re very welcome. Glad you were able to find what you were looking for!

5. I cant find any codes that work on my RCA Tv. Model L32HD31R. I have tried all the rca codes and a bunch of others. Nothing seems to work.

   • Hi Ryan,
     Which remote control are you trying to program? The black or silver one?

     • I have this same TV and issue. I have tried ever code for RCA and several other brands (per other forum recommendations). I have the silver remote with red OK button. I would appreciate any assistance one can provide.

     • Hey Jon,
       Try these: 11661, 10093, 12002, 11602, 10090, 10051

       Keep me updated!

     • Jay, tried them and none work. Every code from the manual and the ones you offered blink on the remote as if they work but will not turn the tv on/off, control volume or any other tv functions.

       Thanks for the help though.

6. cain’t get remote set lost code paper

   • Hi Jo,
     Have you tried using the 9-9-1 auto program method described in the article?

7. I have a Seiki tv that I can get the remote to turn on/off, but the channel buttons don’t work.

   • Hi Jennifer,

     If you send me the model number of your TV I’ll help you troubleshoot it and track down another code if need be.

     • I have a coby flat screen and cant find the code can someone help text me at 443-858-8941 thanks

8. Hisense code is 10030

   • Thanks for the info! It has been added to the list.

9. anyone know if a code for Viore exists? never really been able to get any remotes to work (aside from the original.)

   Silver comcast remote
   LCD26v37ha model number viore TV

   • Hey Adam,
     I have never even heard of that brand, but I will see if I can help track down a code for you. If you find one that works, please post it here for other readers.

   • Hey Adam,
     I hope you have found a code, but if not, give this one a try. 11811

10. Do you have a code for the small black remote for a TCL brand LCD tv?

    • Hi Jessica,
      First, have you tried the 9-9-1 auto-program method?
      Second, if you have tried it, what is the model number of your TV?

      • Hi, I just bought a Vizio sound bar model number SS2521-C6 and I used the codes they gave me. It woked but then my Samsung tv would not work. It erased my Samsung tv codes. I think the codes were for a Vizio TV and not the sound bar. Can you help me. I called Comcast and they were no help. They gave me some codes that did not work either.
        Thanks!

11. Looking for a code for a Sony STR-DH520 surround receiver. Thanks.

    • Hey David,

      Try 20864. Let me know if that works.

12. I have a Niko 3211w and can’t get any codes I’ve found to work for power and volume. I’m trying to use my Comcast remote. Don’t have a tv remote.

    • Hi Pam,
      Have you tried 11581 ?
      Let me know if it works or not.

13. Thanks for the easy to follow steps in programing this remote I had to go to the nunber codes. I have a Phillips everything works the weird thing is I have to hit the info button then the power button to get the tv to turn on or off oh well it works…lol Just in case someone tells you there power button isnt working tell them to hit the info button first then the power button….

    • You’re welcome. Glad you found it useful.
      Hmmm. That is a little weird 🙂 But I guess as long as it works right?
      Thanks for sharing that little bit of info!!

14. Anybody know the code for a Samsung tv/VCR combo? The Comcast remote is the silver one with a red ok button.

15. Trying to find a code that will work for my Apex Digital LD3249 TV. I have tried all the codes Comcast has given me as well as the 991 method…can someone please help me?

    • Hey Shawnece, Have you tried the following?

      21061
      20672
      20830
      21056

      Let me know if those work or not!

16. How do i input code use the black remote?

    • Hey Jacolby,
      If you want input codes, simply hold the “set” button until the light blinks twice, and then input your code.
      You should see the light flash twice to confirm the code has been entered.

17. Hi i have a coby flat screen and cant get the comcast code can somebody help text at 443-858-8941or email me at redeck.1981@yahoo.com

    • Hey Gary,

      1. Have you tried the autoprogram method?
      2. Have you tried all the codes for Coby already?
      3. Send me the model number of your TV. This will help me track down a code.
      4. In the meantime try this one: 11538

18. I have an iSymphony LCD TV where can I get the remote setup code for it?

    • Hey Ray,
      I think Viore makes iSymphony TVs. Try using Viore codes. Let me know if you get it going!

19. Belay that last request, I went through all the codes in the Users Guide and founed that code 10812 worked fot the iSymphony tv that I have.

20. I have a proscan 39 in LED TV and can not get it to sync w/ my comcast remote. Tried the 991 feature as well as scoured the Internet and used all supplied codes from comcast. Any suggestions? Thanks!!!

    • Hey Sam,
      Try this one: 20522.
      Let me know if that works. If not, I’ll see if I can track another one down for you.

      • Hey Jay,

        Thanks so much for the code, but no luck — unfortunately it didn’t work. Any other suggestions? I appreciate your help!

      • Sam, Did you ever find a remote code for your Proscan 39″ LED TV using a Comcast remote? I have the same TV and still can not find the right code. I’ve tried them all plus 9-9-1. Nada…

21. I have an Admiral TV and the 10093 and 10463 codes do not work. Any other suggestions?

22. HELP! What is the Comcast (dark grey remote) code for an APEX Digital tv, LE4643T. I’ve tried them all and they don’t work!!!!

    • Hey Maria,
      Try this code 10765. Let me know if that works!

23. Looking for a code for my MAG LCD tv. I have tried all magnavox codes that Comcast provides and also tried the 9-9-1 method and nothing works

    • Hey Sean,
      What is the model number of your TV?

24. The model # is 2600

    • Hey Sean,
      See if this code will work. 20675
      Let me know how it goes.

      • I have the DTA remote that goes with the digital converter boxes and that code won’t work. Sorry I guess I should’ve said which remote I have earlier

25. I’m trying to get a code for my plasma tv model pl-p42w-10a .The code are listed don’t work.

26. None of the Olevia codes work for my tv neither did the 991 method just went on changing channels endlessly nothing ever shut off 232 s12 is the model no. and I have the light silver remote with the red ok button

27. Silver Comcast Remote with red OK button — anyone know the remote control code for a hitachi HSB32B26 Soundbar

28. I have a ViewSonic N2751w. I have tried every ViewSonic code listed, as well as the 9-9-1 +1 /power /channel+ …….Nothing power never turns off. No commands work at all with any code. Please help if you can!

    Thank You.

29. i have the broksonic tv and ive tried the codes for it but cant seem to get it to work.. please help i have the gray remote with red ok button

    • Hey Chelsey, if you send me the model# of your TV I’ll see if I can track down a code for you.

30. We purchased a 46″ westinghouse LD 4680/24943led tv. We have tried every code that has been suggested and cannot get the tv to turn on and off with our Comcast remote.it’s the small black remote. Any suggestions would be appreciated. Thank you.

    • Hey Beth. Have you tried 10885 yet? Or have you tried the 9-9-1 method?

31. I have an Apex Digital LCD 32″ and none of the codes I’ve found ANYWHERE seem to work. I’ve tried: 10890 10748 10879 10765 10767 11991 and a few others… I also can’t get the 9-9-0 or the 9-9-1 thing to work.. Any suggestions?

    • Hey Holly. Try 20672.

32. I also have an apex digital television 4088 lcd I believe and have had the hardest time programming the silver comcast remote with the red ok button.. Have tried many many codes and the 991 method but nothing seems to turn the tv off or on.. I just want the comcast remote to work with the tv so can use the all on button and control the volume and not have to get up everytime a channel is to quiet or loud… Is it even possible to program this remote to apex?

    • Hi Cory, codes for that particular model are hard to find. Try this one: 20672
      and let me know if it works or not.

      • I have an Apex 32″ and just tried that code, but it didn’t work. Almost 2 years and I haven’t found the right code yet. 9-9-1 doesn’t work to find it either.

33. I have a Hewlett-Packard TV and I have tried both of the codes listed here yet I can’t get either to work. Any suggestions?

    • Hi Danielle,
      Have you tried auto-programming it (991 method) and letting the remote find the proper code?
      You can sen the model number of your TV and I’ll see what I can find.

34. Hitachi? Tried all the codes and 991 method. Nothing! Silver remote.

    • Hey Amy,
      What is the model number?

35. I have a toshiba 36af41 tried the 991 | and the codes they gave me

    • Hey Dex,
      Which remote are you trying to program? Silver w/ red Ok button, black DTA, etc?

36. For those buying the new Proscan PLDED3273A-C 32″ LED that’s on sale everywhere, the Comcast code for my small black remote is 10425

    • Thanks for posting that up Michael!

37. need tv code for hct tv model#hld-470md using xfinity custom dvr 3 device remote thnx

    • Hey Andrew,
      I would try the auto-programming method first and then if that doesn’t work, try LG remote codes for that particular TV.

    • Andrew,
      After a little digging around it looks like Sony and Samsung manufacture parts for the HCT televisions. So you might want to try codes for those brands as well.

38. Looking for a code for my Emerson tv/dvd/vhs. I have a black remote

    • Hi Kim,

      If you give me the model number of your TV, I can see if I can track down the proper code.
      Is this a TV/VCR combo?

39. Hi Jay, Great website! I am using the black DTA remote to control an Audiovox FPE1506DV tv/dvd combo. I tried 991 channel + and all the Audiovox codes in the manual and updated ones online. I managed to get 11865 to change channel and volume but none will power on/off. Any ideas? Thanks in advance!

    • Judy,
      Have you tried entering code 993? Check out the troubleshooting section. This is a common issue that some of the readers have described.

    • Hi Jay,
      Yes, tried 993, still only adjusts channel and volume, will not power off or on 🙁

      • Hmmm. Sounds similar to an issue one of our other readers was experiencing. She discovered that some TV models actually use two different codes, one to turn on, and one to turn off. This may be the case except for volume and power. I’ll look into it.

40. I have a Curtis LCD 2424a & cannot find a Comcast code that will work. I have tried the 991-1 method to no avail. Any codes to suggest would be appreciated.

    • Is it a Curtis Mathes brand? Have you tried all the ones listed on this page?

41. Jay,

    I have a 39 inch Westinghouse LED HDTV ( model DW39F1Y1 ) and am using the small black Comcast remote control with DTA box. The remote allows me to change channels but
    will not adjust volume, can’t control the mute function, and will not power TV on and off….. I tried programming the remote with the 9-9-1 method and with code 10451 ( pressed ‘ set’ button after red light flashed twice ) with no difference in results. .

    Additional suggestions ??

42. I was finally successful after trying code 11577 ….. all the functions of the remote now work …. guess I missed trying that one initially and thought that if using code 10451 allowed my remote
    to change channels, that was the correct code ….. starting the process over paid off

    • Awesome Bob! Glad you were able to get it working!

43. Need Xfinity remote code for small black Xfinity controller to Funai model FF320FX4F with remote model NH307UD

    • Hey Danial,
      Try 11864.
      Let me know if that one works or not.

44. hi!!!! omg!!! l’m so happy @bob anderson l tried the code 11577 and it worked for my westinghouse l’ve been trying forever whew! such a relief

    • Awesome!! Glad you were able to get it working.

45. I have proscan plded3273a-b and the Comcast silver wth red button won’t work,tried 991 scan,and every code I could find on the internet,help please,thanks Tom

    • Hey Tom,
      Proscan TVs have proven to be difficult to find working codes. I’ve made it a point to track down more codes.

    • i just found the code that runs the proscan plded3273a-b: 11577. This is for the silver remote with red button.

      • Awesome Matt!! Thanks for sharing! I will update the list.

      • Omg thank you so much. I been looking for this code for my XR5 remote.

46. i just got a new tv and i get some channels but not all also the channels that do come in freeze and only half the picture comes in but its only in the bedroom the big cable box comes in fine
    i have a seiki led tv

    • Hi Jess,

      So this is happening on the black DTA box?
      What is the model number of your TV?

47. For almost any tv this will work. Press tv then setup wait till it flashes twice then press 911 wait a second then press 1 again then slowly press channel up till the tv turns off then right away press set up to program it in and then see if it will torn your tv on channel up may take a minute because there’s hundreds of program codes be patient

    • Hi Sanderson,
      This method can already be found in the articles here for programming the silver and black remotes, but thanks for sharing!

48. Any clue to finding the code for a KLH R5100 receiver? I’ve tried the published codes and the 9-9-1 search didn’t work!

    • Hi Brooke,
      Is KLH the brand name or part of the model number? If so, please state what the brand is so I can help you track down a code.

49. I got everything on th eremote to work except the guide what do i do now ?

50. I got everything to work except the guide . What do i do now?

    • Hi Wendell,
      Which remote do you have, and what type of cable box?

51. Any word on the Code for the KLH R5100 receiver??

    • I have not been able to find any additional codes for a TV, and not much luck for an audio receiver.

52. LCD Toshiba. Black DTA remote. Tried every code and still no luck. Please help

    • Can you provide the model# of your TV? That will help a lot in tracking down a code.

53. Hey Jay, it appears that you have certainly helped out a WHOLE BUNCH of people. I know the aggravation with this situation because I have an old Sylvania 19″ tevevision, model TVK199K. I’ve searched ALL OVER, including Comcast’s troubleshooting, your suggestions, and all over Google web searches. It appears as though I have one of the few TV’s that just cannot be controlled by the Comcast cable box. If you could help me, that would be incredible man, no joke. It’s really bothering me now. Thanks – Jon

    • Hi JonMon,

      You are right! After doing some quick searching it appears Sylvania and Comcast do not get along very nicely at all. Or with other services for that matter.
      The only thing I can think of is maybe try codes for Funai, as it looks like they are the manufacturer for Sylvania.
      Also, the auto program method may be long and tedious, but it’s worth a shot if you have some time on your hands and just feel like hitting the CH+ button repeatedly.
      I imagine you could be sitting there pressing that button for a long time though.

      Let me know how it goes, and if you find a good code, please post back here for other readers if you don’t mind!

    • Hi JonMon,
      I wanted to give you an update. One of our readers, Karen, was able to find a successful code for her Sylvania TV.
      The code is 11864
      Not sure if this is still an issue for you, but I figured I would give you an update.

54. Hi Jay,

    I have a Westinghouse 32H590D that doesn’t work with the 991, nor 11178 given by Comcast rep, nor with the all the Westinghouse codes listed. Any ideas?
    Tnx

    • Hi Audrey,

      I feel your pain. Westinghouse has always been a troublesome brand.
      Try this one 10463 and let me know if that works or not.
      If not, I’ll see if I can track down another one.

55. Hi Jay,
    I have spent hours upon hours to no avail, trying to find the proper remote code for my comcast remote to manage my Samsung Sound Bar HW-E450 via the AUX key. My remote is an “older remote” and none of the ones currently listed on comcast’s website. The remote is black, with a red Power button at the very TOP Center and the four device keys right below it (aux,dvr,tv,cabl). It only accepts 4-digit codes. Any thoughts?

    • Hi Bob,
      I have only been able to find two codes that might work for you. Unfortunately they are five digit codes.
      They are 32609 and 22609.
      You may want to go Comcast and trade out remotes for a newer model, one that accepts five digit codes.

56. Hi Jay
    I have a coby tv # tftv1524/1923/2224 and it uses the remote #coby RC-022. I use the comccast remote silver with red ok button. I have tryed all the codes I can find plus 991auto program all to no work.

    • Hi Bob,
      Try this code: 21086
      Let me know if that one works or not.

57. Hi Jay, I am trying to find the code for an older model Panasonic/VHS tv with no luck (including the 9111 attempt). Any suggestions,

58. For those of you trying to find the Comcast remote code for a Mintek LCD TV (with built-in DVD player), using the Xfinity remote (silver with red OK/Select button) the code is 11991. Comcast truly sucks at its research and publishes only codes 11990 and 11603. Close on 11990, but no cigar!

    • Hey Cable Maven,
      Thanks a bunch for posting the code for other readers! I will add that particular code to the list.

59. I can’t get my Apex Digital TV to work with any of the posted codes. The model number is LD3288W.

60. I have an Apex Digital tv and none of the published codes will work. Does anyone have other codes then what are listed here? Thanks.

    Mike

61. I have a Sanyo tv I just got this summer and the comcast red select button remote won’t change my channels (or turn the tv on, unless I hit tv and then power). It used to let me hit the channel number and then it would go to that channel. All of the sudden it quit, but will let me hit the channel number then hit select and it will go to the channel. Any ways I thought the remote was bad and I went and traded it out for a new one. I tried all the codes comcast gave me and even called Sanyo but none of them work as they should. Comcast says it’s the tv and Sanyo says it’s comcast remote. Any ideas or just be happy with what I got. Thanks in advance one way or another.

    MJ

62. I found a code that worked for my apex digital TV. It was not listed as one of the Comcast codes. It is 11531. It works with my small black converter box.

63. I bought a garage sale, portable 12VDC / 120VAC (circa 2003) Emerson TV/VCR combo #9020. Just for fun I wanted to see if my Xfinity DTA remote would power it. I used the 991 method and within 2 minutes of CH+ pushing, it works!!

    • That’s awesome Northrup!! Nice!

64. Recently purchased a TCL 40″ Roku TV (Model 40FS4610R). Can’t get the Comcast cable remote to operate the TV controls (on/off and volume). I’ve used the codes from TCL’s website as well as others suggested elsewhere. Many have referenced using the RCA codes. Comcast doesn’t even list TCL in there manufacturers TV code listing. Have also tried the “Can’t find your code?” method with no success. Any help is appreciated.

    • Hi Bernie,
      That’s not a brand I’m real familiar with. But what from I’ve found it looks like Samsung codes may work with them.
      Try programming your remote with the Samsung codes.

65. Just Bought A VIZIO LED Model M552i-B2 What Are The Codes, Also Are The Codes The same For LCD & LED?

    • Have you tried the auto program method? As well as all the codes here?

66. Help! I need a four digit code for a Sanyo tv with comcast as cable provider. Any help will be appreciated! I have a universal remote btw. Thanks!

    • Hi Sd,
      Try 0054 or 0154
      Let me know if those work or not.

67. Jay, how do I program the black remote to a Sansui tv & what is the code ?

68. My LG 42LV5500 wont pair with my Comcast remote.
    I tried the codes listed on Comcast instructions sheet. Can you help me?

69. I am trying to get my xfinity remote (black) to control the volume for the Sony STR-DE185 audio receiver. Help??

70. I have a mintek tv/DVDs. Can’t find code for black remote. Can anyone help

71. The silver remote with the first code fora Hannspree LCD TV worked GREAT! Thank you!!!!!!

72. I need an RC code for a TEAC amplifier/receiver. There are some TEAC codes on the remote’s manual & Comcast’s website had two more but none of them work & I found none here. I have the Xfinity Platinum remote that is silver with the red ok/select button. Any help, especially an email, would be greatly aappreciated. Thanks in advance!

    johnadron at gmail com

73. i have a 24 inch hatachi tv trying to prog the remote so that the all on buttom on the dark sliver and black remote can trun on both cable a tv

    thank you

    george

74. None of the codes provided work for my tv I have a Curtis 24 inch can you help me?

75. Trying to set box up for rca digital tv

76. I need the code for Vizio vw42fhd10A to work with the xfinity X5 remote

77. Can’t find code for RCA LCD TV Model #46LA45RQ. Tech did have it set once but kids messed it up. Tried all codes and auto prog. Siver remote with red ok button. Plz help

78. I have a 32 inch apex TV and have not been able to find a code for quite some time, finally I tried 11531 and it worked awesome!!! Thank you guys!!!

79. I have a apex LE3205 DVD32 Class HDTV … I’ve tried all the codes on paper and all the ones on this page. Any Ideas? THK Curt

80. If you have an Emerson TV model# PL-P42W-10, try 10060 as a code. It worked on mine.

81. I have a xfinity XR11 remote and a VIZIO Sound Stand Model Number SS2521-C6 and the numbers they gave me will work but it takes out my Samsung TV. If I put the code for the TV again then the Sound Stand does not work. Comcast gave me sever numbers and none work. Please Help!

82. need a code that works tried all none work.My xr5 remote turns on tv but no volume control or power off.I have a Sanyo t.v. I tried 50-100 codes only 2 blink like they should work but don’t.This is annoying to say the least.I also tried the 991 but that didnt work either.Hope you have a solution. Thanks

    • I used to work at Comcast. The only way to program your TV that doesn’t respond to codes is use the 991 and channel up. But you have to press the channel up button A LOT of times. I had to press it 147 times for my stereo. I also did that for my boss at the time and he said the tech couldn’t even get it. So… Take your time and count to 200. I hope not. But that’s the only way I got it. Hope that helps. Sorry.

      • Thanks Jake. Before I saw your post I had almost given up. It took me 249 pressings of the channel plus sign, but it worked.

83. PLEASE HELP! I have a Comcast XR11 remote and a Samsung TV. The remote works good with the TV, however, I just bought a VIZO SS2521-C6 Sound Stand and when I put in the codes they suggest I loose the control of the TV. The remote will work with the Sound Stand, but not the TV. Now when I put the codes back in for the TV then the sound stand won’t work. What should I do? I called VIZIO and Comcast and neither has a solution. Will this 991 system work in this case, and if so exactly how do you do it???? Thanks!

84. I have TCL Tv Model # 32S3750. I can’t program My DGA.It is the little black remote from comcast.I can’t find any codes except for 12290 &12292.They don’twork.

85. OK, so here is an interesting situation I’m hoping for some help with. I have and Emerson TV (LC320EMXF, specifically). I never could get my old Comcast remote to work with it. During Comcast’s recent equipment upgrades, I had to turn in my old DVR for the newer one. With the DVR came a new remote, so since it had been a couple of years, I decided to try programming the new remote and although I had to search using the 991 method, it worked. Well, since my remote that worked took a flying leap down a flight of stair (thanks to a 3 year old) I went to the Comcast store and got another remote. Now I can’t get it to program to my TV (I even went back in to replace the replacement in case it was a bad remote and same thing). Can anyone help? I have the dark silver remote with the red OK button. I have tried all the Emerson and Funai codes listed by comcast and tried the 991 method without success. Some other forums have listed code 11864 as one that works well with Emerson TV’s, but my remote won’t accept the code (TV button just does one long blink after entering the code instead of two rapid blinks). I am truly at your mercy. I just find it weird that the old remote got programmed and I’m unable to program the replacements, even though they’re the same remote. Thank you.

86. I need help programming my xr5 v4 r remote to my 46 inch orion led lcd tv sled4668w

    • I used all the code and i can get to work is volume and power nothing else 991 doesn’t work

87. Hey guys, I just upgraded from the XR2 remote to the XR5 and I can’t sync my 32″ DYNEX television. It worked and continues to work with the XR2 but every code I’ve tried with the new XR5 is unsuccessful. Any help would be greatly appreciated!

    Tried the 991 approach and that was unsuccessful as after a certain amount of attempts it stopped searching for TV and started controlling X1 box

88. I have a Sigcus SGC 49b i have been able to find the codes for this TV

    • Any luck

89. Help, I have tried 19 different codes on my Lg tv model number 55LK520. The grey and silver remotes have both worked for this tv but the new black one doesn’t:( any secret codes I haven’t tried?

Comments are closed.